Temporary Fence Panels for the USA — ASTM F2611 / OSHA 1926 Compliant
Factory-direct panels, base feet, clamps and system kits shipped to Los Angeles, Houston, Newark, Savannah and Seattle. 10 × 6 ft US standard size, heavy-gauge options, and full compliance documentation for construction, events and DOT projects.
Built for the US Construction & Events Market
10 × 6 ft US Standard Size
Every panel is produced to the dominant US construction fence size — 10 ft × 6 ft (3050 × 1830 mm). Fully compatible with standard US clamp systems, base feet and bracing components from any US rental or hardware supplier.
OSHA & ASTM F2611 Compliance
Panels meet OSHA 29 CFR 1926 Subpart M fall protection requirements and ASTM F2611 Standard Specification for Temporary Site Fencing. Mill certs, HDG certs and test reports provided with every shipment.
DOT & UFC Approved Options
Steel base plate panels are approved for state DOT and federal highway projects. Compatible with UFC 4-022-03 for military and government facility applications. Buy America domestic content available on request.
Factory-Direct Pricing
No US distributor margin. Direct manufacturer pricing typically 30–50% below US domestic alternatives. Volume discounts for rental fleet top-ups (500–5,000 panels) and recurring contractor orders.
Full Accessory System
We supply the complete temporary fence system: panels, rubber feet (20 lb / 40 lb), steel base plates, C-collar clamps, brace bars, pedestrian and vehicle gates, privacy mesh, and barbed wire arms.
Reliable Port-to-Port Shipping
Regular FCL sailings from Tianjin Xingang and Shanghai to all major US ports. 18–25 days to West Coast, 28–35 days to East Coast. FOB, CIF and DDP options so you know your total landed cost upfront.
Standard USA Temporary Fence Specifications
| Parameter | Standard Option | Heavy-Duty Option |
|---|---|---|
| Panel size | 10 ft × 6 ft (3050 × 1830 mm) | 10 ft × 6 ft (3050 × 1830 mm) |
| Horizontal tube OD | 1.66 in (42 mm) × 14 ga | 1.9 in (48 mm) × 12 ga |
| Vertical tube OD | 1.66 in (42 mm) × 14 ga | 1.9 in (48 mm) × 12 ga |
| Infill wire diameter | 6 ga (4.5 mm) | 6 ga (4.5 mm) |
| Mesh aperture | 2 in × 4 in (51 × 102 mm) | 2 in × 4 in (51 × 102 mm) |
| Surface finish | Hot-dip galvanised (HDG) | HDG or HDG + powder coat |
| Base foot weight | 20–40 lb (9–18 kg) rubber | 40 lb (18 kg) steel plate |
| Clamp type | C-collar clamp, single-bolt | C-collar clamp, heavy-duty |
| Panel weight (approx.) | ~37 lb (~17 kg) | ~48 lb (~22 kg) |
All panels manufactured with traceable steel coils (Q195 / Q235). Mill Test Certificates to ASTM A500 / A1011 and hot-dip galvanising certificates to ASTM A123 provided per shipment.
Complete Temporary Fence System
Fence Panels
10 × 6 ft hot-dip galvanised panels in standard and heavy-duty gauge. Compatible with all standard US clamp and foot systems.
Rubber Base Feet
Blow-moulded HDPE feet in 20 lb and 40 lb options. Stable on flat surfaces, reusable across multiple deployments.
Steel Base Plates
DOT-approved steel plate feet for highway, bridge and utility corridor projects. Meets state and federal specification requirements.
C-Collar Clamps
Connects panels at 180° and 360° angles. Standard single-bolt and heavy-duty versions available.
Brace Bars
Diagonal brace supports for end-of-run sections and gate corners. Essential for wind-loading compliance on open sites.
Pedestrian & Vehicle Gates
Pedestrian gates: 3 ft (914 mm) clear opening matching panel height. Vehicle gates: 12–16 ft clear opening for truck and equipment access.
Privacy / Debris Mesh
HDPE knitted screen mesh in 50% / 70% / 90% shade factor. Green, black and tan colours to meet local ordinance requirements.
Barbed Wire Arms
18" or 24" arms with 2-strand barbed wire for high-security applications. Bolt-on attachment to panel top rail.
Typical US Temporary Fence Applications
Construction Hoardings
OSHA 1926 Subpart M compliant pedestrian exclusion zones on commercial, residential and infrastructure construction sites nationwide.
DOT Highway & Bridge Projects
State and federal highway, bridge and utility corridor protection. DOT-approved panels and steel base plates available for specification compliance.
Special Events
Concert, festival, sports and municipal public gathering perimeters. Quick-install system with reusable feet and clamps.
Demolition Sites
EPA and OSHA compliant hazardous material exclusion zones. Dust and debris containment with privacy mesh options.
Disaster Relief & Emergency
FEMA-funded project compatible. Rapid-deploy temporary security for disaster response, emergency management and civil works.
Federal & Military Facilities
Compatible with UFC 4-022-03 Unified Facilities Criteria for Security Fences and Barriers on military and government installations.
US Standards Reference — Documentation Provided
| Standard / Regulation | Applicability | Documentation |
|---|---|---|
| ASTM F2611 | Temporary site fencing specification | Mill Test Certificate, CoC |
| OSHA 29 CFR 1926 Subpart M | Fall protection / perimeter safety | Product spec sheet |
| UFC 4-022-03 | Federal / military security fences | Structural spec sheet |
| ASTM A500 / A1011 | Steel tube and wire material | Mill certificate |
| ASTM A123 | Hot-dip galvanising finish | HDG certificate |
| Buy America Act | Domestic content (on request) | Domestic mill cert (if applicable) |
How It Works — Factory to Your US Site
Destination Ports
Los Angeles / Long Beach · Houston · Newark (Port Newark) · Savannah · Seattle
Container Loading
Panels nested with feet stacked separately. ~150–200 panels per 20 ft container depending on configuration.
Incoterms Options
FOB Tianjin Xingang · CIF US Port · DDP US Port (landed cost known before you order)
Lead Time
Stock items: 10–15 days. Custom specs or large volumes: 25–40 days. Sea freight adds 18–35 days depending on port.
USA Buyer FAQ — Temporary Fence Import
What is the standard panel size for US construction sites?
10 ft × 6 ft (3050 × 1830 mm) is the dominant US market size, fully compatible with most US rental companies, contractors and hardware suppliers. Custom sizes available for specification compliance projects.
Are your panels OSHA-compliant?
Yes. Our panels meet OSHA 29 CFR 1926 Subpart M fall protection requirements and ASTM F2611 Standard Specification for Temporary Site Fencing. Mill certs and test reports are provided to support your site safety documentation.
Do you supply to rental companies or only project buyers?
Both. We regularly supply rental fleet top-ups (500–5,000 panels) and single-project site packs. Minimum order is typically one 20 ft container for standard items.
Do you offer Buy America compliant products?
Standard products are manufactured in China for export pricing. Domestic (US-manufactured) content options are available on request for Buy America Act projects — contact us for pricing and lead time.
Can I get DOT-approved panels?
Yes. Steel base plate panels approved for state DOT and federal highway projects are available. Specify the applicable DOT specification in your RFQ and we will confirm compliance.
What is the typical lead time from order to US port?
Stock items: 10–15 days production + 18–35 days sea freight depending on US destination port. Custom specs or large volumes: 25–40 days production. DDP quotes include the full landed cost so you can plan your budget accurately.
Request Your Free USA Temporary Fence Quote
Send us your requirements and receive a detailed FOB / CIF / DDP landed cost estimate within 24 hours — no obligation.
Direct Contact
-
Email sales@fence.buma55.com
-
WhatsApp / WeChat +86 150 XXXX XXXX
-
Website fence.buma55.com
In Your RFQ, Include:
- Total panel count and size
- Panel gauge: standard or heavy-duty
- Foot type: rubber 20 lb, 40 lb, or steel plate
- Gate requirements
- Privacy / debris mesh: yes/no, colour
- Destination port
- Required delivery window
- Incoterms preference: FOB, CIF, or DDP