The tightest geometry in anti-climb mesh 鈥?no finger or toe holds, no hook points, defeats standard climbing attempts without additional topping.
358 Anti-Climb Security Fence for South Africa | Mining 路 Industrial 路 Correctional 路 Port Perimeters
358 anti-climb security fence panels for South Africa 鈥?built for mining perimeter, industrial site, and critical infrastructure demand.
Named for its 3鈥?脳 陆鈥?(76.2 mm 脳 12.7 mm) mesh aperture, 358 fencing provides the tightest finger-and-toe-hold geometry available in welded wire mesh security fencing. It is the dominant high-security perimeter choice for South African platinum and gold mining operations, Eskom power station compounds, Transnet port terminals, SANParks conservation boundaries, correctional services facilities, and commercial industrial estates across Gauteng, KwaZulu-Natal, and the Western Cape.
- 76.2 脳 12.7 mm aperture 鈥?anti-climb geometry with no finger or toe holds, defeating most scaling attempts without razor coil topping
- 4.0 mm and 5.0 mm wire diameters 鈥?anti-cut performance against bolt cutters for high-threat environments
- SABS documentation packages available for mining, industrial, and government project tender submissions
- HDG + powder coat duplex finish handles both coastal humidity (Durban, Cape Town) and high-altitude inland aridity (Johannesburg, Pretoria)
- Sea transit 18鈥?5 days to Durban; 22鈥?8 days to Cape Town and Port Elizabeth; FOB / CIF / DDP available
What this South Africa 358 page covers
Make 358 inquiry self-qualify earlier 鈥?so the first message starts with your project type, not a generic panel price request.
South African buyers comparing 358 security fence suppliers look at finish durability for SA climate zones, complete perimeter kit scope, documentation readiness, and shipping routing before requesting a formal quote. This page surfaces those decision factors before you send the first message.
Standard 4.0 mm for general industrial and commercial perimeters; 5.0 mm heavy duty for mining, correctional, and high-threat environments.
Durban (primary, 18鈥?5 days), Cape Town (22鈥?8 days), and Port Elizabeth (22鈥?8 days) 鈥?FOB, CIF, and DAP all available.
Mill certs, material test reports, and compliance documentation packages available for mining board, municipal, and government tender submissions.
Why South Africa drives specific 358 demand
358 security fence demand in South Africa clusters around four high-security buyer types 鈥?each with different project language and compliance requirements.
Understanding which segment you operate in 鈥?and including that context in your first message 鈥?is what separates a fast, targeted quote from a generic export list.
Mining & Minerals
Platinum and gold mining operations across Gauteng (Witwatersrand), Limpopo (Bushveld Complex), and the Northern Cape require high-security perimeter fencing for plant compounds, crusher areas, and stockyard boundaries. SAPS-approved specifications and Eskom supplier compliance are common requirements. Lonmin, Anglo American, and Sibanye-Stillwater supply chain standards apply.
Key provinces: Gauteng, Limpopo, Northern Cape, Free State
Typical heights: 2.4 m 鈥?3.6 m with razor coil topping
Industrial & Commercial
Industrial estates in Johannesburg (Johannesburg Industrial Crescent), Durban (King Shaka Airport zone, Prospecton), and Cape Town (Epping, Montague Garden) require 358 perimeter fencing for factories, warehouses, data centres, and logistics parks. Estate manager boards and municipal building permits often reference SABS standards.
Key metros: Johannesburg, Durban, Cape Town, Pretoria
Typical heights: 2.0 m 鈥?2.7 m with or without topping
Correctional & Justice
Department of Correctional Services facilities across South Africa use 358 as primary perimeter fencing for medium- and maximum-security installations. Specifications often reference SABS 948, SAPS circulars, and international frameworks. G4S, Securicor, and Prisons Board approval processes apply.
Key locations: Kgosi Mampuru (Pretoria), C-Max (Johannesburg), Westview (Cape Town), and regional facilities nationwide
Typical heights: 3.0 m 鈥?4.0 m with V-arm razor coil or electric fence integration
Port & Critical Infrastructure
Transnet port terminals (Durban, Ngqura/Port Elizabeth, Cape Town, and Richards Bay), SANParks conservation areas, Prasa rail corridors, and SANDF facility perimeters require government procurement-compliant 358 fencing. CIDB registration and SARS customs zone documentation are additional requirements for port-adjacent projects.
Key ports: Durban, Richards Bay, Ngqura, Cape Town, Mossel Bay
Typical heights: 2.4 m 鈥?3.0 m with anti-dig extensions
358 security fence specifications
358 anti-climb mesh panel specifications 鈥?metric and imperial both available.
All specifications can be adjusted to match your project drawing requirements. Mill certs and material test reports available on request.
358 Security Fence 鈥?Panel Specifications
| Parameter | Standard Duty | Heavy Duty | Notes |
|---|---|---|---|
| Mesh aperture | 76.2 mm 脳 12.7 mm (3鈥?脳 陆鈥? | 76.2 mm 脳 12.7 mm (3鈥?脳 陆鈥? | Anti-climb geometry 鈥?no finger / toe holds |
| Wire diameter | 4.0 mm | 5.0 mm | Anti-cut performance; heavier gauge for high-threat |
| Panel width | 2.0 m / 2.5 m / 3.0 m | 2.0 m / 2.5 m / 3.0 m | Metric standard; imperial available on request |
| Panel height | 1.8 m / 2.0 m / 2.4 m / 2.7 m / 3.0 m | 2.0 m / 2.4 m / 2.7 m / 3.0 m / 3.6 m / 4.0 m | Custom heights available for specific project specs |
| Horizontal pitch | 76.2 mm | 76.2 mm | Consistent with aperture geometry |
| Vertical pitch | 12.7 mm | 12.7 mm | Tight pitch prevents all hand/foot insertion |
| Surface treatment | Hot-dip galvanised (HDG) | HDG + polyester powder coat | Duplex system for SA coastal and inland zones |
| Colour options (powder coat) | N/A | RAL 6005 green / RAL 7016 anthracite / RAL 9005 black / custom | Custom RAL matched to estate or municipal guidelines |
| Posts | 60 脳 60 脳 2.0 mm RHS galvanised steel | 80 脳 80 脳 3.0 mm RHS galvanised steel | Post size scales with panel height and wind load |
| Post centres | 2.0 m / 2.5 m / 3.0 m | 2.0 m / 2.5 m | Match panel width; tighter centres for cyclone zones |
| Fixings | Anti-tamper M8 bolts + HDG steel clips | Anti-tamper M10 bolts + heavy steel clamp plates | Security-grade fixings prevent panel removal |
| Topping integration | Razor coil bracket, V-arm, or electric fence rail | Razor coil, V-arm, or electric fence integration rail | Specify at order 鈥?brackets welded or bolted option |
358 Security Fence 鈥?Post & Gate Specifications
| Component | Standard | Heavy Duty / High Security | Notes |
|---|---|---|---|
| End / corner posts | 60 脳 60 脳 2.0 mm galvanised RHS | 80 脳 80 脳 3.0 mm galvanised RHS | Thicker section for higher panels and wind loads |
| Intermediate posts | 60 脳 60 脳 2.0 mm galvanised RHS | 80 脳 80 脳 2.5 mm galvanised RHS | Standard duty post centres: 2.0鈥?.0 m |
| Post length | Panel height + 600鈥?00 mm embedment | Panel height + 900鈥?200 mm embedment | In-ground concrete sleeve for anti-tamper base |
| Base plate option | Bolt-down base plates available | Bolt-down or embedded 鈥?anti-tamper per brief | Specify for installations without in-ground posts |
| Single swing gate | 1.0 m / 1.5 m / 2.0 m wide 鈥?galvanised | 1.0 m / 1.5 m / 2.0 m / 3.0 m wide 鈥?HDG + powder coat | Gate infill matches 358 mesh; drop-bolt and latch |
| Double swing gate | 3.0 m / 4.0 m / 5.0 m / 6.0 m wide | 3.0 m鈥?2.0 m wide 鈥?heavy duty frame | V-gate stop, slam lock, or motorised automation option |
| Motorised slide gate | Up to 6.0 m wide opening | Up to 12.0 m wide opening | automation prep: chain rack, control housing, safety beams |
Finish Selection Guide for South Africa Climate Zones
| Finish System | Recommended For | Salt Spray Rating | Typical SA Applications |
|---|---|---|---|
| HDG only (hot-dip galvanised) | Inland / arid zones 鈥?Johannesburg, Pretoria, Polokwane | ~500鈥?00 hrs | Industrial estates, mining plants inland, commercial perimeters |
| HDG + RAL 6005 green powder coat | Coastal and mixed zones 鈥?Durban, Richards Bay, Cape Town | ~1000鈥?500 hrs | Port terminals, coastal industrial, estate perimeters |
| HDG + RAL 7016 anthracite powder coat | Commercial and residential estates 鈥?all zones | ~1000鈥?500 hrs | Upscale estates, commercial frontage, municipal projects |
| HDG + custom RAL powder coat | HOA-compliant or project-specified colour requirements | ~1000鈥?500 hrs (varies) | Estate developments, government projects with colour specs |
358 fence applications in South Africa
358 security fence covers six primary application segments in South Africa 鈥?each with specific height, topping, and gate requirements.
Mining Perimeter & Plant Security
Platinum, gold, and coal mining operations require 358 perimeter fencing to secure plant compounds, explosives storage zones, stockyard boundaries, and conveyor corridors. SAPS compliance and Eskom supplier standards are commonly referenced. Anti-dig extensions and razor coil topping are standard.
Height: 2.4 m 鈥?3.6 m
Topping: Razor coil standard
Gates: Vehicle gates + pedestrian access gates with turnstile
Industrial Estate & Logistics Park
Factories, warehouses, and logistics parks in Johannesburg, Durban, and Cape Town industrial zones use 358 for perimeter security against theft and trespassing. Estate management boards and municipal building permits often require SABS-referenced specifications.
Height: 2.0 m 鈥?2.7 m
Topping: Optional razor coil or none
Gates: Vehicle entry gates + pedestrian gates
Correctional & Justice Facilities
Department of Correctional Services facilities require 358 as primary perimeter for medium- and maximum-security installations. Specifications reference SABS 948, SAPS security circulars, and international correctional standards. V-arm razor coil or electric fence integration is standard.
Height: 3.0 m 鈥?4.0 m
Topping: V-arm + razor coil or electric fence rail
Gates: Heavy-duty vehicle gates with sally port
Port Terminals & Customs Zones
Transnet port perimeters (Durban, Ngqura, Cape Town) and SARS customs-controlled zones require government procurement-compliant 358 fencing. CIDB registration, SARS zone documentation, and CIDB grading requirements may apply for public sector projects.
Height: 2.4 m 鈥?3.0 m
Topping: Razor coil or anti-climb finials
Gates: Vehicle gates with access control, pedestrian gates with turnstile
Power Station & Utility Infrastructure
Eskom power station compounds (Kusile, Medupi, Camden, Tutuka) and substation perimeters require high-security 358 fencing. NERSA compliance, Eskom supplier registration, and security-cleared installation teams are typical requirements for utility projects.
Height: 2.4 m 鈥?3.0 m
Topping: Razor coil standard
Gates: Vehicle gates + personnel access with biometric or card reader
Conservation & Reserve Boundaries
SANParks and private game reserve boundaries use 358 anti-climb fencing to contain wildlife and prevent poaching. Mesh specification must be tight enough to prevent snaring. Electrified option is common for rhino protection corridors.
Height: 2.4 m 鈥?3.0 m
Topping: Optional electric fence rail integration
Gates: Vehicle gates + wildlife-compatible pedestrian gates
Standards & compliance documentation for SA projects
Documentation packages available for South African tender and procurement submissions.
Supplying SABS-referenced documentation with your tender submission separates a credible supplier from a generic panel seller.
SABS Standards Referenced for Security Fencing
| Standard | Scope | When Required |
|---|---|---|
| SABS 948 | Physical security barriers 鈥?fence design and performance | Government and municipal projects; correctional facilities |
| SABS 1571 | Welded wire mesh products 鈥?material and dimensional requirements | Project specs referencing wire mesh fencing materials |
| SABS 763 | Hot-dip galvanised coatings on steel 鈥?coating weight and adhesion | Galvanising specification for SA coastal and inland projects |
| SABS ISO 1461 | Hot-dip galvanised coatings 鈥?international alignment standard | International-aligned projects; Eskom and Transnet supplier specs |
| BS 1722-4 | British Standard for anti-climb mesh 鈥?mesh geometry and strength | Projects referencing BS EN or UK-adopted standards; international developers |
Documentation Package Contents
The following documents are available as part of the SA compliance documentation package on request:
- Mill certs for hot-dip galvanised steel strip / wire rod (origin and grade)
- Material test reports (chemical composition and mechanical properties)
- Zinc coating weight certificate (SABS 763 / SABS ISO 1461 compliance)
- Panel dimensional inspection report (aperture, wire diameter, panel size)
- Powder coat adhesion and colour matching certificate (if powder coat specified)
- Export packing list and case markings (suiting Durban, Cape Town, Port Elizabeth port handling)
- Certificate of origin
- Bill of materials per linear metre of fence (for tender cost submissions)
Specify SABS documentation required at RFQ stage 鈥?documentation preparation adds 2鈥? business days to quote delivery.
Shipping to South Africa
Three port routes cover all major South African demand centres 鈥?plus road freight to Gauteng and inland provinces.
Durban (Primary Route)
Durban port handles the largest volume of China鈥揝outh Africa container cargo. Transit time 18鈥?5 days from Tianjin/Xingang. The majority of Gauteng-bound cargo clears Durban and moves by road to Johannesburg, Pretoria, and the broader Witwatersrand.
Transit: 18鈥?5 days
Port handling: 40GP, 40HQ, 20GP all suitable
Road freight: Durban 鈫?Johannesburg (approx. 6鈥? hours); Durban 鈫?Pretoria (approx. 7鈥? hours)
Lead province: KwaZulu-Natal, Gauteng, Mpumalanga, Free State, Lesotho
Cape Town (Western Cape)
Cape Town port serves Western Cape, Northern Cape, and Namibian re-export corridor. Transit time 22鈥?8 days. Ideal for projects in Cape Town, Stellenbosch, Paarl, George, and Namibian border posts.
Transit: 22鈥?8 days
Port handling: 40GP, 40HQ, 20GP all suitable
Road freight: Cape Town 鈫?Stellenbosch (1 hour); Cape Town 鈫?George (4鈥? hours)
Lead province: Western Cape, Northern Cape, Namibia
Port Elizabeth / Ngqura (Eastern Cape)
Port Elizabeth (Gqeberha) and the adjacent Ngqura container terminal serve Eastern Cape industrial and automotive corridor. Transit time 22鈥?8 days. Suitable for Gqeberha, Makhanda, East London, and Southern Cape projects.
Transit: 22鈥?8 days
Port handling: 40GP, 40HQ suitable
Road freight: Port Elizabeth 鈫?East London (~3.5 hours)
Lead province: Eastern Cape
Typical 40HQ Container Packing Plan 鈥?358 Security Fence
| Item | Quantity / 40HQ | Notes |
|---|---|---|
| 358 mesh panels (2.4 m 脳 2.5 m, 4.0 mm) | ~150鈥?00 panels | Quantity depends on height; taller panels = fewer per container |
| Intermediate posts (60 脳 60 脳 2.0 mm 脳 3.0 m) | ~80鈥?00 posts | Bundled and steel-strapped; 3.0 m length fits 40HQ floor plan |
| End / corner posts (80 脳 80 脳 3.0 mm 脳 3.6 m) | ~20鈥?0 posts | Heavier posts for heavy duty specification; bundled separately |
| Razor coil (single or double coil) | ~50鈥?00 rolls | Depending on topping specification; coiled and strapped |
| Gates (single swing 1.5 m) | ~10鈥?5 gates | Panels and frame kit; gate leaves in crate |
| Fixings, clips, bolts (M8 / M10) | Full order quantity | Barrelled or bagged; labeled by type |
This is a representative packing guide. Actual quantities depend on panel height, post centres, gate count, and topping options. Request a detailed packing plan with your RFQ.
Trade Terms for South Africa 358 Fence Orders
| Term | What It Covers | Best For |
|---|---|---|
| FOB Tianjin / Xingang | Factory to port of loading; buyer arranges sea freight and insurance | Buyers with their own freight forwarding or shipping accounts |
| CIF Durban / Cape Town | Cost, insurance, and freight to SA destination port; buyer handles customs | First-time buyers or buyers without SA customs experience |
| DAP to Site | Delivered at place to project site; we handle main carriage, buyer handles import clearance | Buyers wanting landed cost visibility without full logistics management |
| DDP Johannesburg / Cape Town | Delivered duty paid to final destination; we handle all logistics and customs | Buyers who want simplest procurement path with one invoice |
SABS documentation for tender submissions
Request SABS compliance files with your RFQ - not after.
For municipal, mining, or government project tenders that require SABS compliance documentation, include the requirement in your initial RFQ. We prepare the documentation package alongside the pricing so both arrive together.
- Include: project type, destination city, and whether tender submission deadline is approaching
- We typically turnaround SABS compliance packages within 3-5 business days of receiving the requirement
- Documentation is project-specific - we do not supply generic compliance letters
Frequently asked questions
Questions South African buyers ask before ordering 358 security fence.
What is the minimum order quantity for 358 security fence to South Africa?
MOQ is 20 panels for standard stock orders. For custom sizes, finishes, or heights, MOQ starts at 50 panels per specification. Full-container orders (20 ft or 40 ft) offer the most competitive per-unit pricing. We include a detailed packing and container loading plan for orders from 1 x 20 ft container upwards.
What is the typical lead time from order confirmation to shipment?
Standard panel orders (HDG finish) ship within 10-15 business days from order confirmation and deposit. Heavy-duty specifications (5.0 mm wire, custom heights above 3.0 m) and powder coat finishes require 15-20 business days. We confirm the production schedule and estimated ship date in writing before production begins.
What 358 wire diameter should I specify for a South African mining perimeter?
For standard industrial or commercial perimeters, 4.0 mm wire is sufficient. For mining operations, correctional facilities, or high-threat environments, specify 5.0 mm heavy-duty wire. Anti-cut performance improves significantly with the heavier gauge, and the additional cost per linear metre is typically 15-20% above standard.
What panel height is most common for South African projects?
For industrial estates and commercial perimeters: 2.0 m - 2.7 m is most common. For mining perimeters: 2.4 m - 3.0 m with razor coil topping. For correctional and high-security facilities: 3.0 m - 3.6 m minimum, often with V-arm brackets and electric fence integration. We can advise on height vs. topping combinations based on your threat assessment.
Can SABS compliance documentation be provided for mining board or government tenders?
Yes. We prepare SABS compliance documentation packages for project bid submissions including mill certs, material test reports, zinc coating weight certificates, and dimensional inspection reports. Include the requirement, project type, and tender deadline in your initial RFQ - we prepare the documentation alongside the commercial pricing so both arrive together. Typical turnaround is 3-5 business days.
What finish is best for South African coastal environments - Durban, Cape Town, Port Elizabeth?
For sites within 5 km of the coast (Durban, Richards Bay, Port Elizabeth, Cape Town Atlantic seaboard), we recommend HDG + thermosetting powder coat (marine-grade, RAL 6005 or RAL 7016). The duplex system provides both the sacrificial protection of HDG and the barrier protection of powder coat - critical for salt air environments. HDG alone is acceptable for inland projects in Gauteng, Limpopo, and the Highveld.
What topping options are available for 358 fence in South Africa?
Standard options: razor coil (single strand concertina, double strand concertina), flat wrap razor mesh, V-arm brackets with or without razor coil, and electric fence integration rail. The V-arm + razor coil combination is most common for SA mining and correctional applications. Electric fence integration requires advance specification - we work with your electric fence contractor to ensure bracket compatibility.
Can you supply gates that match 358 mesh infill panels?
Yes. Gates are supplied with 358 mesh infill matching the fence panels - same wire diameter, same aperture, same finish. Gate options include single swing (1.0 m - 2.0 m), double swing (3.0 m - 6.0 m), and motorised sliding gates (up to 12.0 m wide). Automation prep (chain rack, control housing, safety beam brackets) is available - specify at RFQ stage.
What payment terms do you offer for South African buyers?
Standard payment terms for first-time South African buyers: 30% deposit by T/T, balance against shipping documents (B/L copy). For repeat orders or established accounts, we can discuss open account terms (NET 30) subject to credit approval. Irrevocable Letter of Credit (LC) available for orders above USD 50,000. We accept T/T and L/C; invoices in USD.
Can sample panels be sent to South Africa before a bulk order?
Yes. Sample panels (1-2 panels, 1.8 m or 2.0 m height) and accessory samples (post section, fixings) can be sent by air freight to Johannesburg or Durban. Typical cost for 2 panels + accessories via DHL or air freight is USD 150-300 depending on weight. Sample cost is credited against subsequent bulk orders above a defined threshold. Request samples in your RFQ - we send a sample pack recommendation based on your project type.
Request a quote
Send your South Africa 358 security fence requirements - receive a detailed response within 24 hours.
Every South Africa inquiry is reviewed by our export team and answered with a real price, not a placeholder. Include what you know and we will fill the gaps.