Chain Link Fence for Australian Commercial and Industrial Projects
Galvanised and PVC-coated chain link fencing systems for sports facilities, construction sites, industrial perimeters, and utility enclosures across Australia — manufacturer direct supply with full post, rail, gate, and barbed wire topping scope.
← Back to Australia Overview
Why Chain Link Fence for Australia
Chain link remains one of the most widely used fencing systems in Australia for cost-sensitive perimeter, sports, and utility applications. Sourcing direct from a manufacturer delivers:
- Lower unit cost versus local distributors — especially for large-run commercial or infrastructure projects
- Full system supply — mesh rolls, line posts, end/corner posts, top rail, tension wire, fittings, and gates in a single shipment
- Flexible coating options — hot-dip galvanised (HDG), PVC-coated, or duplex HDG+PVC for coastal environments
- AS 1725 compatible heights — 1.2m, 1.5m, 1.8m, 2.0m, 2.4m, and 3.0m to suit school, utility, and security specifications
- Sports-spec mesh — 38mm aperture for tennis courts and ball-stop applications
Common Applications in Australia
- Tennis courts and multi-use sports courts (ball-stop mesh, 3.0m+ height)
- Construction site hoardings and temporary-to-permanent transitions
- Industrial yard and warehouse perimeters
- Water treatment and utility infrastructure enclosures
- School boundaries and community recreation areas
- Mining camp and remote site perimeters
- Residential boundary and driveway entry runs
Standard Specifications
| Parameter |
Standard |
Heavy Duty |
Sports / Ball-Stop |
| Mesh aperture | 50 × 50 mm | 50 × 50 mm | 38 × 38 mm |
| Wire diameter (core) | 2.5 mm | 3.0 mm | 2.5 mm |
| Coating | HDG or PVC-coated | HDG + PVC duplex | PVC-coated (green/black) |
| Heights available | 1.2m – 2.4m | 1.8m – 3.0m | 2.4m – 4.0m |
| Roll length | 15m / 25m | 15m / 25m | 15m / 25m |
| Line post OD | 48 mm | 60 mm | 48 mm |
| End / corner post OD | 60 mm | 76 mm | 60 mm |
| Top rail OD | 38 mm | 48 mm | 38 mm |
| Post spacing | 3.0m centres | 3.0m centres | 2.5m – 3.0m centres |
| AS 1725 compatible | Yes (specify height) | Yes (specify height) | On request |
Coating and Finish Options
- Hot-Dip Galvanised (HDG): Standard for inland industrial and utility applications — 40–60 µm zinc coating, long service life in dry environments
- PVC-Coated over galvanised core: Green (RAL 6005), black (RAL 9005), or grey — preferred for sports, schools, and streetscape applications
- HDG + PVC duplex: Best for coastal Queensland, WA, and NT environments where salt air accelerates corrosion
- Custom PVC colours: Available on MOQ runs — specify RAL code or Colorbond name
Topping Options
- Barbed wire — 3-strand or 5-strand on outrigger arms, angled in or out
- Razor wire flat coil or concertina on topping bracket
- No topping — standard for schools and sports facilities
- Extension arms for 45° or vertical barbed wire
Ordering and Lead Times for Australia
- MOQ: From 500 linear metres for standard HDG stock specs; custom specs from 1,000m
- Production lead time: 10–15 days for standard HDG; 15–20 days for PVC-coated or custom colour
- Shipping: FCL to Melbourne, Sydney, Brisbane, Fremantle, or Adelaide — approximately 18–25 days sea transit from east China ports
- LCL available: For smaller orders — adds 5–8 days and consolidation handling cost
- AS 1725 note: Specify "AS 1725 compatible" in your RFQ for school, government, or utility applications — we confirm applicable height and post spacing
Gates and Accessories
- Single and double leaf swing gates (matching mesh and frame spec)
- Sliding gates — manual and motor-ready
- Barbed wire outrigger arms and tension wire assemblies
- Post caps, base plates, and concrete-in sleeves
- Tension bars, bands, and tie wire
- Anti-lift and anti-dig foot brackets
Request an Australia Chain Link Fence Quote
Include mesh height, linear metres, coating type, topping, gate count, and destination port. We return a full system quote within 24 hours.
What to Include in Your RFQ
- Fence height required (1.2m, 1.5m, 1.8m, 2.0m, 2.4m, or 3.0m)
- Total linear metres of fencing
- Mesh aperture: standard 50mm or sports/ball-stop 38mm
- Coating preference: HDG, PVC-coated (colour), or HDG+PVC duplex
- Topping: none, barbed wire (strand count), or razor wire
- Gate count and type (swing or slide, with or without motor prep)
- Destination port: Melbourne, Sydney, Brisbane, Fremantle, or Adelaide
- AS 1725 compliance required: yes / no
- Project timeline or delivery deadline